© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
|
www.rgblink.com
21 / 35
PTZ Camera Setting
Camera
：
choose camera 1~8
Enable
：
choose On to enable the LAN
communication of the chosen camera.
Zoom
：
Click + - to Zoom in and out
Focus
：
Slide Auto to On usually
Brightness
：
Click + - to adjust
Preset
：
Load position and zoom setting of camera
lens from View 1~20
Save: Save position and zoom setting of camera
lens to View 1~20
Pan/Tilt Speed
：
Adjust the lens moving speed.
Positioner
：
to adjust the lens left right up down
position
OLD IP
：
the current IP address of the camera
New IP
：
the new IP address just typed in.
Port: Set port number for PTZ camera. PTZ control
support Visca protocol, port number is 1259 by
default. mini+ support control PTZ cameras in
same IP address with different port number.
Note: Not all cameras can be set IP and port
number on XPOSE, for those cameras, IP and port
number set can be done on web.
