FLEX 8
User Manual
32
Mirror:
Enable or disable the mirror function, default “OFF”.
Bypass Mode:
Enable or disable the bypass mode. When select “ON”, the output
format
will be the same with the input format.
Alpha:
Set the alpha, the adjustment range is 0~128.
Sharpness:
Set the sharpness, the adjustment range is 0~100.
Brightness:
Set the brightness, the adjustment range is 0~100.
Contrast:
Set the contrast, the adjustment range is 0~100.
Saturation:
Set the saturation, the adjustment range is 0~100.
Color Term:
Set the color temp (red, green and blue), the adjustment range is 0~100.
Reset:
Select “Reset”, the input property will be recover to factory setting.
Test Pattern:
Slide the Test Pattern switch to enable or disable the function.
For USB input setting there is USB player setting
select “USB Player”, it will enter to the USB Player interface, including movie and
picture, default play the USB picture.
Содержание FLEX 8
