RGBLE MHD-51M Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 24

RGBLE MHD-51M Скачать руководство пользователя страница 15

Stock Code 873117 en.rgble.com 400-1661-021

P/N: S00302

5.7.1 48V mode

When switched to “48V” (It has a good frequency characteristic, high input impedance and high sensitivity
in this mode), the MIC input will provide a 48V phantom power. This is only used for 48V condenser
microphones.

1)

Unbalanced connection:

“+” and “

” connect to ground, and “-” connects to signal.

“-” and “

” connect to ground, and “+” connects to signal.

2) Balanced Connections: “+” connects to positive, “-” connects to negative and “

” to ground.

5.7.2 MIC mode

When switched to “MIC” (It has a low frequency characteristic, and wide frequency response in this mode),
the microphone input is used for connecting dynamic microphones and electrets condenser microphone.
There are two different connections:

1)

Unbalanced connection:

“+” and “

” connect to ground, and “-” connects to signal.

“-” and “

” connect to ground, and “+” connects to signal.

2)

Balanced connection: “+” connects to positive, “-” connects to negative and

«
...
13
14
15
16
17
...
»

Содержание MHD-51M

























Отзывы:

Нет отзывов