RGB Technology 102-02-07, Техническая и эксплуатационная документация

Страница: 3 / 10

DTR_102-02-07-001_EN_f
3
1 Manufacturer
RGB Technology Sp. z o. o.
Karola Mytnika 28
75-129 Koszalin
POLAND
2 Specifications
IR remote control for the devices of ZA / ZB series
Dimensions [mm]: 86.2 x 40 x 8.3
Range
1
: 10m
Remote control power supply CR2025 battery
Ingress protection rating
2
IP: 50
Weight: 19.5g
3 Transport and storage
The device is sensitive to mechanical damages. Care should be taken to properly protect the device during
transport so as to eliminate any damage. It is forbidden to transport the device components separately in a
collective package – each component must be packed separately and cannot 'bump' during transportation.
Due to protective packaging, the device should be stored in the temperature -20°C ÷ +60°C at the humidity
below 99%RH.
4 IR remote control construction
4.1 Device construction
The figure shows the IR remote control construction
3
:
det. A – function buttons; det. B – IR trasmitter; det. C - CR2025 battery; det. D – place for a strap.
Fig. 1
4.2 IR remote control dimensions
All dimensions shown in the figures are given in [mm].
Fig. 2
1
The range of the remote control is specified to be 10m.
Please, take into account that the range is influenced, among others, by the following factors:

the angle at which the remote control is set in relation to the receiver – the maximum range is obtained when the remote
control is set in front of the receiver, that is perpendicularly to the surface of the display and pointing towards it;

the illumination of the device by the sunlight – has a negative impact on its range;

the remote control battery status.
2
Ingress protection rating is defined according to EN 60529 standard.
3
Explanatory figure.