RGB Lasersystems Abeam, Руководство пользователя

Страница: 14 / 33

4 Computer Control
The Lambda mini uses a USB interface for remote control. The laser can be controlled
with
• The Windows application software Ltune (included),
• the cable remote control RC-1 (available separately) or
• Custom user software via serial communication.
4.1 Ltune Laser Control Software
The Lambda beam laser can be configured and controlled using the Ltune software for
Windows. The software features:
• Modulation mode selection
• Output power adjustment
• Display of the laser status, configuration and operating hours
• Temperature display and adjustment
To install the software, simply run the setup file from the CD-ROM included in the
package. The setup package then installs the application software and the device driver.
For the operating system to properly recognize the de software first before attaching the
device.
The software is tested with 32 and 64 bit versions of Windows 10, 8, 7, Vista and XP.
It requires the Microsoft .NET framework version 3.5 or 4.0, which is already installed on
most PCs. If this framework is not installed, the setup package asks you to install it first.
You can find the setup file for the .NET framework on the CD or download it from Mi-
crosoft’s website. Please note that you need at least version 3.5 of the .NET framework.
After the software is installed, please connect your Lambda mini laser to a USB 2.0
port on the computer. You can use the provided USB cable or almost any other Micro-
USB cable.
If not already installed wait until the laser driver is completely installed. The laser
should be detected automatically. If not you can click on device setup to start a new
search.
11