Copyright, RFXCOM 2022
RFXtrxWifi/USB User Guide Rev. 0.2
page 6 / 10
6. Restore Wifi settings
To reset the Wifi settings press the RESTORE button inside the RFXtrxWifi and configure the
RFXtrxWifi as described above.
7. Configure the transceiver
The transceiver can be tested and configured with the RFXmngr program.
For the RFXtrxWifi set the IP address of the RFXtrxWifi.and port 10001.
For the RFXtrxUSB select the correct USB port.
Select the protocols necessary for receive and click Set Mode followed by Save Settings.
There is no need to select protocols for transmit!
Note that you can only select 1 protocol for reception in the RFXtrx868XL.
The reason for this is because each protocol uses different frequencies and modulation!!!
RFXtrx433XXL settings:
RFXtrx868XL settings:
