background image

Testing and Care  

Wander Management Transmitters User Guide 

Page 19 of 28 

0510-1122-J 

expired. If the warranty period has 

expired, discard and replace the 

transmitter immediately. 

4.  Your facility must keep records of test 

and transmitter inspection. 

 

 

Transmitter 

Cleaning 

and Care 

This section provides detailed information 

about cleaning and caring for a transmitter. 
For an up-to-date list of approved cleaning 

solutions, visit: 

www.rft.com/Resources/Manuals & Specs/ 

Transmitters/Transmitter Approved Cleaning 

Solutions 

 

CAUTION

: Use of non-approved cleaners 

on transmitters can cause permanent 

damage to the transmitter and will void any 

and all warranties. 

 

To clean a transmitter after use: 

1.  Remove the banding material from the 

transmitter and dispose of it. 

2.  Disinfect the transmitter by wiping it with 

an approved cleaner. 

 

CAUTION

: Using an approved cleaner does 

not confirm the suitability of the cleaner to 

meet your infection control standard; it only 

indicates that the transmitter will not be 

harmed by the cleaner.  

The transmitters may be sprayed or rinsed 

with water or the approved cleaners during 

cleaning, but must not be soaked. Soaking 

transmitters may result in equipment and/or 

system failure. 

Содержание Code Alert Wander Management

































Отзывы: