Installation
The NetSDR uses an ethernet connection to the PC for communications. The NetSDR can be connected
directly to a PC or it can connect to a router or switch. There is no need to use a crossed cable when
connecting directly to a PC.
To use the NetSDR with a direct to PC connection, connect the supplied ethernet cable between the
ethernet connector of the NetSDR and the ethernet connector on the PC. The PC will have to be config-
ured with a manual IP address like 192.168.1.2 and the NetSDR with a manual IP address like
192.168.1.3 . To change the IP address of the NetSDR in a non DHCP environment, the user will have to
manually add an IP address to the computer (like 192.168.1.2) and then change the IP of the NetSDR
using the SDRNetFinder appication to (192.168.1.3 for example)
Under Control Panel, Network Connections, Local Area Connection Status:
10
Jan 2012
RFSPACE, Inc.
NetSDR Wideband Digital Radio User’s Guide
