Document Référence : 10000000985 Version
1
Specifications subject to change without notice.
APM40-1 Direct mount assembly
Figure 3: Direct mount assembly
Pipe mounting shown. For wall mounting, refer to Figure 1b.
Rear pipe bracket is not required. Top and bottom mounting
arrangements are identical.
APM40-2
Figure 4: Beam Tilt Assembly (downtilt)
Bottom mount assembly is the same as direct mount (Figure 3).
Figure 6: Azimuth Tilt Extension
Top and bottom mounting arrangements are identical.
APM40-1 and APM40-E3
Figure 7: Azimuth Tilt with Beam Tilt
Insert azimuth bracket between arms of tilt beam, bolting down
onto flat surface of pipe bracket . Bottom arrangement as
shown in Figure 6.
APM40-2 and APM40-E3
Figure 8: Scissor Tilt Extension with Azimuth
Insert scissor arm into tilt beam as shown in Figure 5. Insert
azimuth bracket into scissor arm, and bolt down onto flat
surface of pipe bracket. Bottom assembly as shown in
Figure 6.
APM40-2 APM40-E2 and APM40-E3
Figure 5: Scissor Tilt Extension
Insert scissor arm into beam tilt assembly. Bottom
mount assembly is the same as direct mount (Figure 3).
APM40-2 and APM40-E2
