RFIDeas AIR ID, Руководство пользователя

Страница: 25 / 56

pcProx
®
and AIR ID
®
Enroll Readers
Device Found
This indicates the type of pcProx or AIR ID
Enroll reader found (RS-232 or USB). The
configuration program automatically checks for a
USB reader first, and if it does not find one, it
scans COM ports 1 through 8 for a serial port
model.
Reset to defaults
This button is used to put the device back into a
know state. All configuration settings are set
back to their factory defaults.
Config changed
This checkbox is selected by the program to
indicate to the user any modifications made to
the configuration which have not been written to
the device.
Test RS--232
Check this box to view ASCII card data in the
field below. Note selecting this checkbox
disables the configuration from working with the
devices flash memory. De-select this checkbox
in order to continue configuring the reader.
Read pcProx
Use this button to read the device’s current
configuration.
Write to pcProx
This button is used to write the configuration
settings displayed to the device.
WARNING: Do not write the configuration while
a card is being read on the reader. This may
cause a connect error. If you receive this error,
you may need to detach the reader and plug it
back in to cure the error.