RFI DSPbR EDGE Series, Руководство пользователя

Страница: 21 / 64

DSPbR EDGE
Series User’s Manual
Asia Pacific | EMEA | Americas 21
Channel and Channel Name:
Displays if each channel is Active/Disabled and its configured Name.
Trunking Extender (visible if option fitted)
Type:
Displays each channel's type; Standard (or non-trunking), Primary or Secondary Control Channel, or Traffic channel.
Donor Band Plan:
The selected Donor site’s Band Plan for each channel.
Donor Channel Number:
The off-air Donor channel number for each channel.
Extender Band Plan:
The unit’s rebroadcast Band Plan for each channel.
Extender Channel Number:
The unit’s rebroadcast channel number for each channel.
Downlink and Uplink
Donor In and Service In (MHz):
Displays the current off-air RX frequency (in MHz) for each channel.
Service Out and Donor Out (MHz):
Displays the current output TX frequency (in MHz) for each channel.
Gating (dBm):
Displays the current RX gating threshold value for each channel.
Filter:
The currently selected channel filter mask selected for each channel.
Delay:
A value that adds delay to the passing of RF signals by the channel
’s selected Filter group delay. This value can be entered to
synchronise the output signals of multiple EDGE units (i.e. simulcasting).
TX Limit (dBm):
The configured TX RF output power for each channel.
TX Power (dBm):
The current TX output power for each channel. TX output power will only be present if the off-air receive signal for the channel
exceeds the Gating threshold. The TX output power may be below the configured TX Limit level if the off-air receive signal is too
low to achieve the configured TX
Limit value at the unit’s 100dB maximum gain. Above this minimum off-air receive level, the gain
of the unit will automatically adjust ('auto-gain') to maintain the configured TX Limit value for each channel.
RSSI:
Displays the current off-air RX signal level for each channel. When no signal is present this value is the current noise floor present
in the channel.
The contents of the page are described in the Help screen.