5
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 500 - 1000W
Rev 1.3
General Safety Recommendations
All work on transmi er system as well as installed units, e-g- the VHF/FM transmi er,
may only be carried out by trained personnel capable of iden fying dangerous
situa ons or condi ons. Take note of the following:
• Before working on a transmi er system, that is even before removing the VHF/
FM transmi er ensure that the correponding system documenta on is consulted.
• Before workign on an open unit ensure that the fuse ahead of the unit is
disengaged or the power cable to the unit is disconnected.
• Note that when service work is carried out, e.g. measurements or se ngs are
made during transmi er opera on, voltage carrying parts are not always secured
against touching.
• All work is to be carried out with great cau on.
CAUTION!
The VHF/FM transmi er does not possed a mains switch. Even when the transmi er
system is in the “OFF” state, voltages are s ll present at the assemblies of the VHF/FM
transmi er, e.g. mains power at the input of the power supply module is live and the
fan is in opera on.
Assemblies with components incorpora ng toxic substances are labelled as follows:
A warning sign as shown in the adjacent fi gure is glued to a
component incorpora ng
a Toxic substance
of glued in the vicinity of the component.
Warnung
Dieses Bauelement enthält Beryllium-Oxid, das in fein verteilter
Form giftig ist. Bei bestimmungsgerechter Verwendung des
Bauelementes entstehen keine Gefahren.
Gegebenenfalls sind entsprechende Sicherheits- und Umwelt-
vorschriften zu beachten.
Identifi cation of Toxic Substances
B e r y l l i u m o x i d
