To select a programs for outgoing COFDM stream press SYS key The meaning of symbols are + = FTA
program selected, scrambled program selected but not opened at the headend, $ = scrambled program
selected and opened at the headend, - = program is not selected. To save and exit or $ marked
program and press OK key.
The default value is “+”.
The logical channel number (LCN) can be modified as following. Select the wanted program number (e.g.
0004) in Channel List menu. Then just press the wanted position number (e.g. 02). The set-top-box set this
program to memory place no 2. NOTE! LCN setting works only in the set-top-boxes which support LCN
function.
The LCN selection can be canceled by typing 00.
NOTE! After selecting programs go to “Modulator” menu and press OK to check the status of bit rate.
“Fill” beam shows how many percentage of the maximum stream is used.
3.4 Other functions
In main menu, select “SW Version Info” and press OK to display receiver and user interface version
numbers plus unit serial number info.
Menu Language = menu language.
RF-Tuote Oy, Joensuunkatu 13, 24100 Salo tel. +358-2736 6360, fax. +358-2-736 6355, [email protected], www.rf-tuote.fi
