11
bE Menu – Beep Tone Volume Setting
bE Menu
– Default Setting is 31. The volume of the
radio’s beep tone is adjustable from off to 63 (100%). See
R.B. / BP in Front Panel Control section for more detail.
PA Menu – Public Address (PA) Volume Setting
PA Menu
– Default Setting is 31. The volume of the
radio’s public address transmission is adjustable from off
to 63 (100%). See Operating Mode in Front Panel Control
section for more detail.
REAR PANEL
1. External Speaker / PA Jack
A combination external speaker and public address
(PA) jack is located on the rear panel of the
transceiver.
The MAGNUM 1 is designed to accept any standard
8 ohm external speaker for use with two-way
transceivers. When an external speaker is connected
to this jack the radio’s internal speaker is
disconnected.
To use the radio’s PA feature (see 9. Operating Mode
in Front Panel Controls section) a public address horn
(speaker) should be connected to this jack.
2. CW Key Jack
To operate CW (morse code) connect a CW key, or
paddle, to the CW Key jack on the back of the radio.
3. DC Power Input
The radio uses a standard 3-pin DC power cord with
10 amp inline fuse. Important: Note polarity when
connecting power cord to power input jack.
4. ANT (Antenna)
The radio uses a standard UHF (SO-239) style
antenna jack. Use only 50-ohm coaxial cable with PL-
259 style connect.
OTHER FEATURES
1. FACTORY RESET
To reset the radio back to factory (out of the box)
programming:
(1) Turn radio off.
(2) Press both FUNC button and SCAN button
simultaneously.
(3) Turn radio on.
(4) Release FUNC and SCAN buttons.
(5) LCD will read rES ?
(6) To start reset press the FUNC button.
(7) LCD will count down and radio will reset back to
factory programming.
