NOTE! After selecting programs and parameters go to “Modulator” menu and press OK to check the status
of bit rate. “Fill” beam shows how many percentage of the maximum stream is used. It is recommended that
the stream is max. 85% (average), if programs are removed from outgoing stream. If all coming programs
are transmitted to outgoing stream then max. fullness can be 96%.
Press EXIT key to exit from menu. The settings you made will be saved.
When programming is ready, the front panel switch must be slide to c”OFF” This will prevent accidental
changes to be made while controlling other units. The display, except two led, are switched off in 6 minutes
after programming is finished.
4. Technical specification
COFDM (DVB-T/DVB-T2)/QAM (DVB-C) INPUT
Number of channels
1 (KV-87S)
2 (KV-87T)
1(KV-87S)
Tuners
2 (KV-87T)
Input frequency range
177,5 - 858 MHz
Input level
45 … 85 dBuV
Bandwidth
7 MHz or 8 MHz
FEC decoder
Automatic
QAM OUTPUT
Modulation
QAM 32, 64, 128, 256
Output frequency range
114 MHz - 858 MHz
Symbol rate
1-8 Msymb/s
Output level
85 - 105 dBuV
Data interface
2* USB 1
Input connectors
F-female 75 ohm
Output connectors
F-male 75 ohm
Power consumption
16VDC/1,2A
Dimensions
W*H*D
72mm*218mm*129mm
Mounting
RFT-800 system or stand alone
RF-Tuote Oy, Joensuunkatu 13, 24100 Salo tel. +358-2736 6360, fax. +358-2-736 6355, [email protected], www.rf-tuote.fi
