RF 812G, Инструкция по эксплуатации

Страница: 10 / 31

D. BLADE DIRECTION OF TRAVEL:
Be sure the Made is assembled to the pulleys such that
the vertical edge engages the work piece first.
BLADE MOVEMENT
EMERGENCY STOP
Blade Direction
E. STARTING SAW:
E-1. Switch button function description
** Coolant switch was integrated in with the
toggle switch. Coolant function is ON when
you start the machine running, If you do not
need the coolant function, please turn of the
rocker switch on the coolant pump.**
A
↓
Stop button
B
↑
Start button
E-2. STARTING SAW:
Switch button function description (FOR CE ONLY)
E-3. Electromagnetic Switch
The self-latching, lockable EMERGENCY
STOP button is equipped with an under voltage circuit
breaker.
When the switch is in closed position, it
may be secured with a padlock to prevent
the machine from being turned on accidentally
or by unauthorized personnel.
ON / OFF switch
Open the cover of the switch in order to
switch on the metal belt saw.
Close the cover after switching on to
guarantee
correct operation of the EMERGENCY
STOP function.
Toggle Switch
MERGENCY STOP button
AUIION: NEVER OPERATE SAW WITHOUT
BLADE GUARDS IN PLACE.
Be sure the blade is not in contact with the work when
the motor is started. Start the motor, allow the saw to
come
d
NOT DROP OR FORCE.
.
inness of the work to be cut:
E
C
to full speed, then begin the cut by letting the hea
down slowly onto the work. DO
Let the weight of the saw head provide the cutting force
The saw automatically shuts off at the end of the cut.
F. BLADE SELECTION:
A 8-tooth per inch, general-use blade is furnished with
this metal Cutting Band Saw. Additional blades in 4, 6, 8,
and 10 tooth sizes are available. The choice of blade
pitch is governed by the th
the thinner the workpiece, the more teeth advised. A
minimum of three (3) teeth should angage the
-8-