General Information
Page 14 of 36
Safe Place Transmitters User Guide
0510-1121-G
Smart Sense
The Smart Sense technology combines the
Smart Sense transmitter and Smart Sense
banding material to give you the capability
to recognize if a transmitter has been
removed from an infant or if it has been
tampered with or is loose.
The following are the measurements for
tamper detection (referred to as Band Off for
Infant systems only):
Resistance
—banding material no
longer stretching with infant's movement
Capacitance
—change in contact
between transmitter and infant
Depending on your facility, one or two
measures for tamper detection can be
configured for activation. Refer to Configure
Units in the applicable Series Software
Administrator Guide.
To band the Smart Sense transmitter:
1. Remove the Smart Sense banding
material (with the plastic guide tabs still
attached) from the plastic backing.
Содержание Safe Place Patient
Страница 1: ...Safe Place Transmitters User Guide...
Страница 12: ...Preface Page 10 of 36 Safe Place Transmitters User Guide 0510 1121 G This page intentionally left blank...
Страница 39: ......