HORNETPRO Remote Con-
QUANTAFOB Remote Control System
2
Safety Information
Carefully read the following safety information before proceeding with installation, operation, or mainte-
nance of RF Solutions product. Failure to follow these warnings could result in death or serious injury
•
This radio system must not be used in areas where there is a risk of explosion.
•
Only qualified personnel should be permitted to access the transmitter and operate the equipment.
•
Always follow operating information as well as all applicable safety procedures and requirements.
•
You must satisfy the age requirements in your country for operating the equipment.
•
Store in a safe place.
•
Keep a clear view of the work area at all time before using, check it is safe to do so
Before maintenance intervention on any remote controlled equipment
•
Do not open the receiver enclosure unless you are qualified.
•
Disconnect all electrical power from the equipment.
Battery Precautions
•
Risk of explosion if battery is replaced with a battery of an incorrect type.
•
Do not short-circuit, disassemble, deform or heat batteries.
•
Never attempt to charge a visibly damaged or frozen battery.
•
Do not use or charge the battery if it appears to be leaking, deformed or damaged in any way.
•
Immediately discontinue use of the battery if, while using, charging, or storing the battery, the bat-
tery emits an unusual smell, feels hot, changes color, changes shape, or appears abnormal in any oth-
er way.
HORNETPRO Remote Con-
QUANTAFOB Remote Control System
11
RF Solutions Ltd. Recycling Notice
Meets the following EC Directives:
DO NOT
Discard with normal waste, please recycle.
ROHS Directive 2011/65/EU and amendment 2015/863/
EU
Specifies certain limits for hazardous substances.
WEEE Directive 2012/19/EU
Waste electrical & electronic equipment. This product must be disposed of through a licensed WEEE collection point. RF Solutions
Ltd., fulfils its WEEE obligations by membership of an approved compliance scheme. Environment agency number:
WEE/JB0104WV.
Waste Batteries and Accumulators Directive
2006/66/EC
Where batteries are fitted, before recycling the prod-
uct, the batteries must be removed and disposed of
at a licensed collection point. RF Solutions battery pro-
ducer number:
BPRN00060.
