RF SOLUTIONS PLUGTEXT, Быстрый старт

Страница: 3 / 4

PLUGTEXT GSM Socket PLUGTEXT GSM Socket PLUGTEXT GSM Socket PLUGTEXT GSM Socket
D
D D
DS
S S
S----P
P P
PL
L L
LU
U U
UG
G G
GT
T T
TE
E E
EX
X X
XT
T T
T----1
1 1
1
3. Plug unit into wall socket Plug unit into wall socket Plug unit into wall socket Plug unit into wall socket and switch on
4. The unit will now register with the network, see
LEDs below
5. When Blue LED is ON unit ready for instructions
LED Status
LED Status LED Status
LED Status ON ON ON ON Flashing Flashing Flashing Flashing OFF OFF OFF OFF
GREEN LED (POWER)
GREEN LED (POWER) GREEN LED (POWER)
GREEN LED (POWER) Unit is switched ON Unit is switched OFF
BLUE LED BLUE LED BLUE LED BLUE LED
(GSM Status)
(GSM Status) (GSM Status)
(GSM Status)
Registered onto mobile
Network OK
Searching for Network
or Sending SMS
No Sim card or
no network available
RED LED (Output)
RED LED (Output) RED LED (Output)
RED LED (Output) Output is ON Output is OFF
Quickstart Guide Quickstart Guide Quickstart Guide Quickstart Guide
1. On the rear of the unit insert a simcard
insert a simcard insert a simcard
insert a simcard,
2. Slide the power switch to ON
Add a Master number to the socket
Add a Master number to the socket Add a Master number to the socket
Add a Master number to the socket
The user must edit and send the following SMS to socket via his/her
mobile phone (the phone number will be the Master
Master Master
Master number) in order to:
Add a Master number to the socket Add a Master number to the socket Add a Master number to the socket Add a Master number to the socket: #00#
Successful SMS reply Successful SMS reply Successful SMS reply Successful SMS reply
Welcome to use EMATE E3011.
Your Password is:1234
To Switch Output ON
To Switch Output ON To Switch Output ON To Switch Output ON
Send an SMS with the command #01#
#01# #01#
#01#
The unit will reply with “The socket power output has been switched on”
To Switch Output OFF
To Switch Output OFF To Switch Output OFF
To Switch Output OFF
Send an SMS with the command #02# #02# #02# #02#
The unit will reply with “The socket power output has been switched off”
To perform a factory reset
To perform a factory reset To perform a factory reset
To perform a factory reset
Send an SMS with the command #08# #08# #08# #08#
Or, press and hold the manual override button for 5 seconds.
For Full set of instructions (and many more features) please see User Manual