HORNETPRO Remote Control
LoRaLyser
—
RF Packet Analyser
QS-LORALYSER-1
Scope Screen
Packet Analyser Page
Swipe L or R to next
page
Serial Number
Decoded TX Command
RSSI Value
Battery Voltage Level
Packet Analyser Screen
RF Signal Trigger Level of Scope trace is set by Slider on
RF Meter Screen
Slide to
adjust
X Axis/ Time
Screen can be zoomed or swiped to view
more data
M1, M2:
Memory
Store
Screen
Image
HORNETPRO Remote Control
LoRaLyser
—
RF Packet Analyser
QS-LORALYSER-1
WARNING!
We have successfully tested this product with Samsung, Huawei, LG, so far, Please note that
Sony Smartphones do not have a serial port and therefore require the user to install a serial
driver. We welcome any feedback from other makes of Android.
Walk / Ping Test Screen
To Perform “WALK / PING Test”
1. Place Receiver into “LEARN Mode”
2. Press Start button on app
Analyser will now send “ping” commands,
the response back from receiver will be
displayed
Transmitter ID
Received Signal Strength
From Transmitter
Time from “ping” sent to response
received
Note!: Ping requires an RF Solutions
compatible receiver with “acknowledge”
feature.
Phone Compatibility
—
WARNING!
Before using this product please ensure that your android phone is compatible with external
Serial Devices, and can be connected to OTG accessories.
The LoRaLyser uses a standard serial port device which requires the Android phone to be
compatible with.
The USB OTG feature is available on almost every Android smartphone, however, some phones
lack this feature. For unlocking the OTG capabilities, you may need to root and install a custom
ROM on your Android device to get compatibility.
