BRAVO Telemetry Module
DS-BRAVO-9
BRAVO Configured as a RECEIVER
Watchdog enabled
If “watchdog” is enabled the BRAVO
-Rx will await a signal from a paired BRAVO-Tx
module. When the Watchdog signal is received OK then the watchdog output will be main-
tained active high. If no watchdog signal is received in any 30minute period then the BRAVO-
Rx will drop the Watchdog output. Other outputs are unaffected.
NOTE: watchdog must be enabled on BOTH Tx and Rx for it to work.
Digital outputs
Active high LVCMOS / LVTTL compatible outputs. Can be connected directly to CMOS/TTL
logic or drive.
560R
5
6
Learn
LED
Learn
Switch
Vcc
Optional external learn switch and LED example circuit
Receiver example application circuit
BRAVO
10 11 12 13 14 15 16 17 18
9
8
7
3
2
1
Vcc
GND
ANT
LEARN Sw
5
6
4
Output 8
Output 7
Output 6
Output 5
Output 4
Output 3
Output 2
Output 1
LED
Description:
This example shows a BRAVO module configured as a receiver with all 8 outputs connected
and watchdog disabled.
Note: The external learn switch and LED are also not fitted in this example.
