RF Neulink NL6000, Руководство пользователя

Страница: 35 / 52

RF Neulink 35 NL6000 User Guide
6.5. Repeater Setup
Each NL6000 unit may have up to eight repeater entries. Each repeater
entry includes a trigger, trigger ID, transmit channel, and transmit delay
value. If a unit does not act as a repeater, do not set up any repeater
entries. For more information about setting up a repeater unit, refer to
Section 5.5
Table 3 shows how to set up the
Trigger
and
ID
values for each type of
repeater trigger.
Trigger
Field
ID Value Use
MYID nnnn (h) Used to repeat a packet from a remote to a base
station. The ID value is the MYID of the remote – or
group of remotes if using a wildcard.
TOID nnnn (h) Used to repeat a packet from a base station to one or
more remotes. The ID value is the TOID of the
remote – or group of remotes if using a wildcard.
Table 3: Setup of Repeater Trigger Fields
Selecting the Repeater Entry to Edit
1. Select
Network Repeater Select Repeater Entry
.
2. Enter the number assigned to the repeater entry you want to set or edit.
Repeater entries are assigned a number in the range 1 – 8. After you
select an entry number, the system displays the current parameter
settings for that repeater entry.
3. Press
ESC
to return to the
Repeater
menu where you can set any of the
four repeater parameters.
Setting the Repeater Trigger
1. Select
Network Repeater Trigger
.
2. Select from the following options:
1-MYID
Trigger the repeater function for packets addressed with
a
MYID
equal to the
ID
value. Set the trigger
ID
to the
MYID
of the remote unit from which you want to repeat
packets. Refer to Table 3.
2-TOID
Trigger the repeater function for packets addressed with
a
TOID
equal to the trigger
ID
value. Set the trigger
ID
to
the
TOID
of the destination unit. Refer to Table 3.