RF Neulink NL6000, Руководство пользователя

Страница: 14 / 52

RF Neulink 14 NL6000 User Guide
Caution:
The mounting screws should protrude no more than 3/16 inches
into the case to avoid damaging the electronic circuitry within the unit.
Caution:
For radio modems operating with the 5 Watt VHF option, a
mounting bracket is required as an additional heatsink. The mounting
bracket is available from RF Neulink.
4.4. Serial Port
The serial port on the NL6000 is a 9 pin female connector.
The NL6000 is a Data Communications Equipment (DCE) device. Other
equipment that can connect to the NL6000 via the serial port fall into one
of the following categories:
DTE
Data Terminal Equipment (computers, mainframes,
terminals)
DCE Data Communications Equipment (modems, printers,
other peripherals)
Connect a DTE device to the DB9 connector with a 9-pin male connector
wired one-for-one as shown in Figure 4 and Figure 5.
Figure 4: DTE to DCE Connection
Figure 5: Male and Female Connectors with Numbered Pins