RF Central RFX-HD-D, Руководство оператора

Страница: 11 / 13

RFX-HD-D Last Rev: July 2008 11
Operator’s Manual
RF ExtremeCare: 866.732.0113
5.4.2 Video output
The
▲▼
buttons are used to select the parameter. The
►
button changes the value. The O key
confirms the selection. The following parameters may be set:
ƒ
ASI output mode packet format - 188 / 204 / byte
ƒ
DV1 output connector – SDI or ASI
ƒ
DV2 output connector – SDI or ASI
ƒ
AV1 output connector – CVBS or component Y (note AV2 connector is always component C
and cannot be switched)
5.4.3 Audio levels
This menu allows each of the 4 analog audios to be off-set from the nominal 0 dB line level output.
The setting of these values is reflected in the Status menu – see paragraph 5.3.2
The
▲▼
buttons are used to select the parameter. The
◄►
button changes the value. The O
confirms the selection. The following parameters may be set:
ƒ
Genlock status – Enable/Disable
ƒ
Genlock reference type – SD Composite black sync or HD Tri-level sync
ƒ
Genlock timing offset – H
ƒ
Genlock timing offset - V
5.5 Remote control
The Ethernet port on the rear of the unit, allowing remote control of the RFX-HD-D, is currently a
future option
.