Optional wire grid
to increase radiant
efficiency
10.0 Accessories
Heat Deflector, Option DO2
A heat deflector is available on Sizes 30-100 to permit less clearance above the heater.
See Paragraph 4.
Chain and "S" Hooks, Option UE1
Option kit includes 50 ft (15M) of 200 lb (91 kg) chain and 14 "S" hooks.
Chain Mounting Kit, Option UE2
Option kit includes assembled chain and "S" hooks for mounting one unit (See
FIGURE
4
, page 8).
Gas Connector and Shutoff Valve, Option UF2
Option kit includes a 24" stainless steel gas connector and shutoff valve.
Standard
Reflector
Optional Screen
The following are field-installed accessories. Follow the instructions shipped with the
option package.
Thermostat, Option CL34
is a 24/120 volt thermostat that can be used to control
1-5 units. This thermostat can also be used to control the exhaust fan circuit.
Thermostat, Option CL82
is a 24-volt, 2-stage digital thermostat that can be
used with Option AG2R for automatic control of 1-5 units.
Parabolic Reflector, Option DM2
The addition of the parabolic reflector
increases the infrared intensity pattern
while decreasing the scope of heating
coverage.
Installation affects clearances and mounting height; see page 7.
Wire Grid, Option DN2
Available on all sizes except
RIHN 30.
Required on Canadian
installation of
Model RIHN 60.
Protective Screen, Option DN3
This screen is designed to protect the
ceramic block from damage caused by
the entrance of foreign objects.
(
NOTE:
Not for use with parabolic
reflector, Option DM2. If protective
screen is required with parabolic
reflector, contact factory.)
Form I-RIH, P/N 131793R8, Page 16
