4
1.0 Compliance notices
The Reznor range of warm air heaters
detailed herewith are manufactured by
Nortek Global HVAC within a strictly
controlled environment within the
parameters of ISO9001
These instructions are only valid if the
following country code is on the appliance
GB. IE.
If this code is not present on the
appliance, it is necessary to refer to the
technical instructions which will provide the
necessary information concerning the
modification of then appliance to the
conditions of use for the country.
The Reznor LCSBD range has been
independently tested and assessed, and
has been found to meet the Essential
Requirements of the following European
Directives.
Gas Appliance Directive (90 / 396 / EEC)
Machinery Directive (2006/42/EC)
Low Voltage Directive (2006/95/EC)
Electromagnetic Compatibility Directive
(2004/108/EC)
Product Liability Directive (85/374/EEC)
The manufacturer has taken reasonable and
practical steps to ensure that Reznor
LCSBD range of Heaters are safe and
without risk when properly used. These
heaters should therefore only be used in the
manner and purpose for which they were
intended, and in accordance with the
recommendations detailed herewith.
The heaters have been designed,
manufactured, assembled, inspected, and
tested, with safety and quality in mind, there
are certain basic precautions which the
installer and user should be aware of, and
they are strongly advised to read the
appropriate sections of the information pack
accompanying the heater, prior to
installation or use.
Nortek Global HVAC supports all new
products being supplied to their customers
with a comprehensive information pack; this
clearly defines mandatory instructions for
the safe installation, use, and maintenance,
of the appliance (s).
Where proprietary items are incorporated
into Reznor products, detailed information
and instructions are also provided as part of
the information pack.
It is the responsibility of the installer, owner,
user, or hirer, of such products supplied by
Nortek, to ensure that they are familiar with
the appropriate information manuals,
supplied by the manufacturer, and that they
are suitably aware of the purpose of the
manuals and the safety instructions. In
addition, operators must be suitably trained
in the use of the appliance so as to ensure
its continued safe and efficient use.
Nortek has a commitment to continuous
improvement, and therefore reserves the
right to amend or change the specification of
the LCSBD Heater range subject to
agreement from The Notified Body.
Contained within the text of the manual, the
words '
Caution'
and
'Warning'
are used to
highlight certain points.
Caution
is used when failure to follow or
implement the instruction(s) can lead to
premature failure or damage to the heater or
its component parts.
Warning
is used when failure to heed or
implement the instruction(s) can lead to not
only component damage, but also to a
hazardous situation being created where
there is a risk of personal injury.
The Reznor LCSBD range of heaters
conform to the following European
Harmonised Standards.
BS EN 1020 Requirements for non domestic
gas fired forced convection air heaters for
space heating incorporating a fan to assist
transportation of combustion air and / or
combustion products.
BS EN - ISO 12100-1 & 12100-2
Safety of Machinery - Basic Concepts,
General Principles for Design Part 1 & 2
BS EN 60204 - Part 1
Safety of Machinery - Electrical Equipment
for Machines Specification for General
Содержание LCSBD-4
Страница 30: ...30 Wiring Diagram LCSBD 95 120 145 Auto ignition On Off ...
Страница 31: ...31 Wiring Diagram LCSBD 95 120 145 Auto ignition Hi Low ...
Страница 32: ...32 Wiring Diagram LCSBD 95 120 145 Auto ignition Modulation ...
Страница 37: ...37 MODEL A B C D E 95 800 256 267 95 167 120 980 256 267 95 175 145 1150 259 272 95 177 9 0 Dimensions LCSBD ...