IMPORTANT NOTICE TO INSTALLERS
Installers should satisfy themselves that
the fuel pipework installation is carried out
in accordance with all current legislation,
Codes of Practice and recommendations.
Additionally it may be necessary to protect
the fuel valves which form part of the heater
or burner assembly from potential pipe
contamination particularly, but not exclu-
sively, where copper gas pipework is used.
In instances where copper pipework is to
be used for all or part of a gas pipework
installation, including short length final
connections then we advise that installers
consult with gas supplier or provider and
satisfy themselves what additional precau-
tions may be necessary.
Improper installation, adjustment, alter-
ation, service, or maintenance can cause
property damage, injury, or death. Read the
installation, operation, and maintenance
instructions thoroughly before installing
or servicing this equipment.
Do not use this appliance if any part has
been immersed in water. Immediately call
a qualified service technician to inspect the
appliance and replace any control that has
been immersed in water.
These appliances are not designed for use
within hazardous atmospheres containing
flammable vapours or combustible dust,
in atmospheres containing chlorinated or
halogenated hydrocarbons or in applications
with airborne silicone substances.
Should overheating occur, or the fuel supply
fail to shut off, close the manual fuel valve
to the appliance before shutting off the elec-
trical supply.
This appliance is not intended for use by
persons (including children) with reduced
sensory or mental capabilities or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety. Children should
be supervised to ensure that they do not play
with the appliance.
Any reference made to laws, standards,
directives, codes of practice or other recom-
mendations governing the application and
installation of heating appliances and which
may be referred to in brochures, specifica-
tions, quotations, and installation, operation
and maintenance manuals is done so for
information and guidance purposes only
and should only be considered valid at the
time of the publication.
The manufacturer will not be held respon-
sible from any matters arising from the
revision to or introduction of new Laws,
Standards, Directives, Codes of Practice or
other recommendations.
Failure to comply with the information given with these symbols will result in severe personal injury or death and/or property damage.
WARNING
CAUTION
WARNING:
For your safety, if you smell gas:
• Do not try to light any appliance
• Do not touch any electrical switch, do not
use any phone in your building
• Evacuate all personnel & contact your gas
supplier immediately
• Do not store or use petrol or other
flammable vapours and liquids in the
vicinity of the appliance.
• Improper installation, adjustment,
alteration, service or maintenance can
cause property damage, injury or death.
• Read the installation, operation and
maintenance instructions thoroughly
before installing or servicing this
equipment.
• Do not store or use petrol or other
flammable vapours and liquids in the
vicinity of this or any other appliance.
• In case of persisting problems, contact
your distributor
2
