Step 9
Adjust the product to the required height and ensure that it is
fitted level using a spirit level across the back box as required.
Tighten the lock nuts and re-assemble in reverse order. Adjust
outlet to required angle to give desired performance, and tighten
outlet screws.
Holes are provided in the back box for the feed cable to enter the
case. Choose the appropriate hole top rear to suit the installation.
Fit suitable cable gland for size of cable.
or
Insert correct size flat blade screwdriver from underneath.
Step 8
To install the product using M12 drop rods follow instructions from
step 4. If the decorative tube is to be used, fit this over the drop
rod, then pass the drop rod through the back box brackets.
6
2.1 Installation details - LPHW Only
Access to the heating coil and mains terminal block is via
removal of the case as detailed below
Main Terminal Block
Flow connection with case
Return connection with case
removed. Diameter 15mm O/D
removed. Diameter 15mm O/D
copper tubing
copper tubing
Electrical Connections
With case removed, connect the electrical supply and switchbox
interconnecting wiring to the bottom of the terminal rail (See
wiring diagrams figures 1-4)
To open terminal depress as shown
