REXROTH Fv Series, Инструкция по эксплуатации

Страница: 175 / 222

Fig.10-12: Direct mounting of operating panel at the control cabinet
● When the opening dimensions are larger than the recommendation, a
mounting plate and 4 M4x10 screws are necessary for mounting. Please
refer to fig. 10-13 "Panel mounting plate" on page 173 and fig. 10-14
"Mounting of operating panel at the control cabinet with mounting plate"
on page 173 for detailed information.
Fig.10-13: Panel mounting plate
Fig.10-14: Mounting of operating panel at the control cabinet with mounting plate
10.6.2 Operating Panel Cable for Control Cabinet Mounting
The cable FRKS0001/001,0, which is 1 m long, is used to connect the operat‐
ing panel for control cabinet mounting with the frequency converter.The cable
FRKS0002/003,0, which is 3 m long, can be also used for the connection of
the operating panel. For connection of the FRKS0001 or FRKS0002 cable, it
is necessary to remove the panel at the frequency converter and connect the
cable there.
DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv Bosch Rexroth AG 173/219
Accessories