46/60 Operation
Bosch Rexroth AG
, A6VE Series 65 and 71, RE 91616-01-B/10.2014
9 Operation
wARnInG
Overloading of the axial piston motor!
Risk of injury or damage to equipment!
When using the axial piston motor in winch drives it may, when extremely
overloaded (e.g., if the maximum permissible rotational speeds are exceeded
during weighing of the anchor while the ship is in motion), cause the rotary group
to be damaged and, in the worst case, the axial piston motor may burst.
▶
Ensure that the technical limits are not exceeded in any operating conditions.
▶
Check whether any additional measures are needed for your machine/system
(up to an encapsulation) in order to avoid injury to persons. If necessary, make
sure that these are properly implemented.
▶
For safety reasons, axial piston variable motors with beginning of control at V
g min
(e.g., HA) are not permissible for winch drives (e.g. anchor winches)!
The product is a component which requires no settings or changes during operation.
For this reason, this chapter of the instructions does not contain any information on
adjustment options. Use the product only within the performance range provided in
the technical data. The machine/system manufacturer is responsible for the proper
project planning of the hydraulic system and its control.
