REXON DH410R, Инструкция по эксплуатации

Страница: 4 / 16

1
for the connection of dust extraction and
collecting equipment, ensure these are
connected and properly used.
11. DO NOT ABUSE THE CABLE. Never
pull the cable to disconnect it from the
socket. Keep the cord away from heat,
oil and sharp edges.
12. SECURE WORK.
Where possible use
clamps or a vice to hold the work. It’s
safer than using your hand.
13. DON’T OVERREACH. Keep proper
footing and balance at all time.
14. MAINTAIN TOOLS WITH CARE.
Keep cutting tools sharp and clean
for better and safer performance.
Follow instructions for lubricating and
changing accessories. Inspect tool
cords periodically and if damaged
have them repaired by an authorized
service facility. Inspect extension cords
periodically and replace if damaged.
Keep handles dry, clean and free from
oil and grease.
15. DISCONNECT TOOLS.
When not
in use, before servicing and when
changing accessories such as blades,
bits, cutters, disconnect tools from the
power supply.
16. REMOVE ADJUSTING KEYS AND
WRENCHES. Form the habit of
checking to see that keys and adjusting
wrenches are removed from the tool
before turning it on.
17. AVOID UNINTENTIONAL STARTING.
Ensure switch is in “off” position when
plugging in.
18. USE OUTDOOR EXTENSION LEADS.
When the tool is used outdoors, use
only extension leads intended for
outdoor use and so marked.
19. STAY ALERT.
Watch what you are
doing, use common sense and do not
operate the tool when you are tired.
20. CHECK DAMAGED PARTS. Before
further use of the tool, it should be
carefully checked to determine that it
will operate properly and perform its
intended function. Check the alignment
of moving parts, binding of moving parts,
General Safety Rules
WARNING! When using electric tools
basic safety precautions should always
be followed to reduce the risk of fire,
electric shock and personal injury.
Read all these instructions
before attempting to operate this
product. Save these instructions
for future reference.
1. KEEP WORK AREA CLEAR. Cluttered
areas and benches invite injuries.
2. CONSIDER WORK AREA
ENVIRONMENT. Do not expose tools
to rain. Do not use tools in damp or
wet locations. Keep work area well lit.
Do not use tools in the presence of
flammable liquids or gases.
3. GUARD AGAINST ELECTRIC SHOCK.
Avoid body contact with earthed or
grounded surfaces.
4. KEEP OTHER PEOPLE AWAY. Do
not let others, especially children, not
involved in the work touch the tool or
the extension lead and keep them away
from the work area.
5. STORE IDLE TOOLS. When not in use,
tools should be stored in a dry locked-
up place, out of reach of children.
6. DO NOT FORCE THE TOOL. It will do
the job better and safer at the rate for
which it was intended.
7. USE THE RIGHT TOOL. Do not force
small tools to do the job of a heavy
duty tool. Do not use tools for purposes
not intended; for example do not use
circular saws to cut tree limbs or logs.
8. DRESS PROPERLY. Do not wear loose
clothing or jewellery, they can be caught
in moving parts. Nonskid footwear is
recommended when working outdoors.
Wear protective hair covering to contain
long hair.
9. USE PROTECTIVE EQUIPMENT. Use
safety glasses. Use face or dust mask if
cutting operations create dust.
10. CONNECT DUST EXTRACTION
EQUIPMENT. If devices are provided