Rexing V1P Pro, Руководство пользователя

Страница: 8 / 21

15 14
Inserting a memory card
1. If the device is powered on, press and hold the Power
button to power down.
2. Insert the card in the orientation shown.
3. Push the card into the slot, listening for a click sound
signaling the card is securely inserted.
Removing a Memory Card
Before removing a memory card from your V1P Pro, you must
first dismount it for safe removal.
With the device powered down , press down on the memory
card until you hear a click. Gently remove your finger (or other
pressing object) to allow the spring release to push the memory
card out of the slot.
Do not remove the memory card while the device is
transferring or accessing information . Doing so can result
in data loss or corruption or damage to the memory card or
device. Rexing is not responsible for losses that result from the
use of damaged memory cards, including the loss of data.
Step 3: Formating the Memory Card
Step 3.1: Powering the Camera
You must always connect the V1P Pro to a power
source while operating the camera. Connect the camera
to your vehicle via the included car charger cable. Connect
the larger end of the car charger cable to your car’s cigarette
lighter (12V DC power outlet). Connect the other M ini-USB end
to the M ini-USB port on the device.
Connecting the charger improperly may cause serious
damage to the device. Any damage caused by misuse is
not covered by the warranty. Use only Rexing-approved
chargers. Using unapproved chargers or cables can damage
the device.
If the device receives an unstable power supply, the screen
Press the Power
button to turn the
power off