V1P 3rd Gen Manual
22
©2018 REXING All Rights Reserved
3. Mount the rear camera
Mount the rear camera as shown above. Use the provided rear camera cable to
connect the rear camera to the front camera
.
4. Connect the car charger to the car's 12V DC outlet
Run the cable down from your camera to the 12V cigarette lighter port of your
vehicle. Be sure to connect only
Rexing
-approved chargers designed and
supplied specifically for use with your device. Using an incompatible charger
can cause serious personal injury or damage to your device.
5. Format the memory card
To ensure your camera records to your Micro SD card properly and without
error,
you must format the card within the camera
(See: Page 26).
Note:
Do
NOT
insert or remove a memory card while the device is powered on.