Getting Started
Quick Start
22
@2017 REXING All Rights Reserved.
•
If the device receives an unstable power supply while charging, the
screen may not function properly. If this happens, unplug the charger
from the device.
•
While charging, the device may heat up. This is normal and should
not affect the device’s performance or lifespan.
•
If the device is not charging properly, take the device and the charger
to an authorized Rexing Service Center.
Connecting the charger improperly may cause serious damage to the
device. Any damage caused by misuse is not covered by the warranty.
Inserting the memory card
Note: For a 32GB memory card, you will need to replace your micro SD
card after 3,000 hours of use to prevent any freezing issues or corruption
of the card or videos.
When using a high-endurance card, you will need to replace it after 12,000
hours of use to prevent any freezing issues or corruption of the card or videos.
The device accepts memory cards with a maximum capacity of 32GB.
Depending on the memory card manufacturer and type, some cards may not be
compatible with your device. Using an incompatible card may damage the
device or the memory card, or corrupt the data stored on it.
Use caution to insert the memory card right-side up as shown in the image
below.
•
Insert memory card with the gold-colored contacts facing downwards.
•
Push the memory card into the slot until it locks in place.
