Getting Started
Quick Start
21
@2017 REXING All Rights Reserved.
5. Format the memory card
To ensure the memory card works on the dash cam, we recommend using
the dash cam to format the memory card, (please refer to Formatting the
Memory Card section on Page 23).
DO NOT insert or remove a memory card while the device is powered on.
Charging the battery
Charge the device by connecting the camera via the USB car charger port. Use
only Rexing-approved chargers. Using unapproved chargers or cables can
damage the device or cause the battery to explode.
Connect the car charger’s jack to the USB charging port, and then plug the
charger into the car cigarette lighter or 12V DC power outlet.
•
Internal battery is mainly used to save files in emergency. Please
always connect the device to external power while it is in use.
•
When the device detects no power supply, it will automatically power
off after 5 seconds. To turn on the device again, you will need to do
so manually by pressing the ON / OFF button.
•
If the battery is completely discharged, the device will not turn on
immediately when the charger is connected. Allow a depleted battery
to charge for a few minutes before attempting to turn on the device.
•
The device can be used while it is charging, although it may take
longer to fully charge the battery.
