5
G
Auto shred and stop
1
Place the paper or credit card into the centre of entry slot (B), place CD
into the centre of entry slot (C) - shredding will start automatically.
2
Paper smaller than A4 in width should be placed in the middle of the
entry slot (B) to ensure the shredder works automatically.
3
The cutters will stop rotating automatically after finishing shredding.
4
A separate CD tray is provided to collect the shredded CD shards. CD
and credit card shards should be disposed of separately to paper.
5
Don’t shred more than 10 sheets of paper at a time. Do not attempt to
shred more than one credit card or CD at a time.
6
If too many sheets are inserted at a time, the shredder can become
jammed. If the shredder becomes jammed, switch the button to reverse
( ) position to clear the jam by reversing the paper. If the paper has
become so entangled in the cutter that it can’t be reversed, turn off the
power and pull out the paper by hand. Restart with fewer sheets and
feed the nonshredded end of the paper in first.
CAUTION: Don’t let the machine operate continuously
for more than 2 minutes. When the motor has
overheated, the thermal safety switch will start working
automatically. If the thermal switch trips, do not use
the machine for about 45 minutes while the thermal
sensitive safety switch cools down so the shredder can
be safely used again.
m
Emptying the waste basket
Empty the shredder bin regularly. Over filling the bin will cause the shredder
to stop operating.
1
Unplug the product and lift away the head.
2
Empty the shredder bin.
3
Locate the shredder onto the bin.
CAUTION:
• Never insert fingers into the entry slot of the shredder.
• Turn the power off immediately if your hair, tie or
sleeve becomes entangled in the shredder.
• Empty the shredder bin when it is full otherwise the
shredder’s performance will be adversely affected.
Operating the shredder with a full shredder bin can
result in paper jamming in the cutters, which will
increase the machine’s noise level.
m
Shredder Control Panel
Reverse
Forward
Safety First
This means you should be careful because long hair can become
entangled in the cutting head.
This means don’t reach into the feed opening of the cutting head.
This means be careful of ties and other loose clothing which could
become entangled in the cutting head.
This means keep children away from shredder.
This means be careful of loose jewelry which could become
entangeld in the cutting head.
This means no aerosols.
This means machine is cooling down.
Auto
Off
Lubrication of the shredder
Only use Rexel Oil Sheets (2101948 & 2101949) to lubricate. ACCO Brands
accepts no liability for product performance or safety when other types or
brands of lubricants are used on any part(s) of this machine.
CD and Credit Card Shredding
1
A separate CD tray is provided to collect the shredded CD shards.
Ensure that this is correctly mounted onto the bin before shredding
CDs or credit cards. CD and credit card shards should be disposed of
separately to paper.
2
Empty the CD tray after 8 credit cards or CD’s to avoid waste
spilling over into the paper waste bin. Remove the CD tray before
recommencing to shred paper.
3
Credit cards should only be shredded through the centre of the main
paper entry slot (not the CD slot). This is to ensure that the strip and the
chip on the credit card are destroyed. Rexel encourages customers to
recycle shredded paper. Please note that shredded paper can not be
recycled if mixed with credit card shards. If recycling, please separate
shredded paper, credit cards and CDs.
Troubleshooting
If the paper shredder will not start, please check the following:
1
Is the machine plugged in correctly?
2
Is the switch pushed to the ‘ON/AUTO’ position?
3
Is the machine jammed with paper? If the paper has become so
entangled in the cutter that it can’t be reversed, turn off the power
and pull out the paper by hand. Restart with fewer sheets and feed the
nonshredded end of the paper in first.
4
Has the motor overheated?
5
Is the shredder head located correctly on the bin
In case of jammed paper, please follow the procedure below:
1
Check if the bin is too full with paper - the bin should be emptied
regularly to avoid paper becoming jammed in the cutters.
2
Slide the switch to reverse ( ) position to reverse the jammed paper.
3
If the paper is so jammed that it will not come out in reverse function,
slowly push the switch between reverse ( ) and ON/AUTO. Don’t do
this too quickly as this can damage the shredder.
4
WARNING –
Do not under any circumstances use any metal objects
(scissors, letter openers etc.) in an attempt to clear the entry – this
model has mains voltage inside the casing, which could cause serious
injury.
Содержание DUO
Страница 3: ...U U U U U U U D A F C B G E ...
