1.
Assess patient’s transport needs
2.
Extend RexONE DCS frame to a prone or flat position
3.
Ensure frame hinge points are in locked position (Will
hear “click” when hinge joints are moved into locked
position)
4.
Align RexONE DCS frame with patient in backboard
position
5.
Pull lower restraint strap out and away from RexONE
DCS frame
6.
Use approved EMS guideline to move patient onto
RexONE DCS Backboard-stabilize patient neck and trunk
7.
Roll patient on side and place RexONE DCS frame
against patient’s spine
(Figure 15a)
8.
With RexONE
DCS supporting patient’s spine, roll patient
into a prone position
(Figure 15b)
9.
Once in prone (flat) position, secure patient with
strapping system (
Figure 15c)
10.
RexONE DCS can continued to be used as a back board
and carried by responders
Figure 15a
Figure 15b
Figure 15c
RexONE DCS APPLICATIONS
Backboard Use
18
