GB-17
ENGLISH
Part list · Assembly
Parts list
No.
Description
Quantity
1
Main frame
1
2
Foot front
1
3
Foot rear
1
4L
Pedal left
1
4R
Pedal right
1
5
M5 Screw
4
6
M5 pin
4
7
Display
1
8
Pedal crank
1
9
Resistance controller
1
10
Plate
2
Assembly
The fi tness machine is largely pre-assembled.
1. It will only be necessary to assemble both feet (2, 3) to
the main frame (1) using the plates (10) and the screws
(5, 6) included in the delivery.
2. Also, the pedals (4L, 4R) must be attached to the pedal
cranks (8). During the assembly, make sure that both pe-
dals are installed on the respectively correct side, other-
wise they could break out. The right pedal is screwed in
clockwise and the left pedal is screwed in anti-clockwise.
For better identifi cation. Tighten both pedals fi rmly!
To insert or replace the battery, carefully pull up the display
(7) out of the main frame (1).
Use only batteries of the type: AAA 1.5 V.
WARNING
After inserting the batteries, gently set the display (7)
back on the main frame (1), as the batteries may other-
wise lose contact.
REX_Trainer_Minicycle12.indd GB-17
REX_Trainer_Minicycle12.indd GB-17
09.05.12 13:08
09.05.12 13:08