
GB-31
ENGLISH
Assembly
Assembly
STEP 1
STEP 2
1. Assemble both frame tubes (3) to the rear foot (19).
For each case use four screws (9) as well as one
washer (6 + 8) and one spring washer (7) in each
case (see Fig.).
2. Connect both frame tubes (3) with the connecting
strut (18). Use both swivel bases for the fi xation
(22).
3. Seal the ends of the frame tubes (3) with the two
plugs (4).
4. Mount the front and rear foot (2 + 19) to the frame
(1). Use four screws (9a + 9b) four cap nuts (20),
four spring washers (7) with respectively one washer
each (6).
WARNING
1. Mount the left/right support tube for the footboard
(11L + 11R) to the crank (33). Use one washer (59),
one washer (8) and one screw (40) each.
2. Attach the axle cover (90) (see Fig. 2-1).
3. Assemble both rear covers (93L + 93R) with one
screw each (63 + 100) to the support tubes for the
footboard (11L + 11R) (see Fig. 2-2).
4. Now fi x the footboards 821) with two screws each
(73) to the fi xing plates of the support tubes (11L +
11R) (see Fig. 2-3).
WARNING
REX_Trainer_FX401E_13.indd GB-31
REX_Trainer_FX401E_13.indd GB-31
08.05.13 09:49
08.05.13 09:49