9
Wiring diagram
6.1.5 Note: The orange wire should be connected to the siren (optional),
however, it can also be connected to your vehicle's horn .
6.1.6
Check if the type of your vehicle's door trigger is positive or negative
trigger. Please connect the green wire to the door control circuit if it is
positive, and connect the blue wire if it is negative.
6
.1.7 If you wish to use the reset and SOS button, install it where the driver can
easily reach.
6.1.8 Insert the shock sensor plug (RS+ model, optional) into the sensor jack
6.1.9 Insert the external Microphone into the microphone jack and place the
microphone to your desired location.
6.1.10 Connect the GPS and GSM antenna to the corresponding connector. Find
an appropriate place and fix the antennas. Under the front dashboard is
the most ideal location to fit the antennas. Thick metal surfaces (e.g.
bonnet) will degrade the GPS signal and reduce accuracy. Therefore,
antennas should be installed under or as close as possible to windows,
windscreen or plastic surfaces.
6.1.11 If you wish to use the remote immobilizing function, the circuit breaker
relay unit must be installed to the cable that pr12v power to your
fuel pump. Please do this by cutting the 12+ fuel pump wire and installing
the relay unit in between. The thick red wire should be connected to 12+
power side (usually coming from the fusebox) and the thick yellow wire
should be connected to the fuel pump side. This way the power circuit to
