8
6.1.2
On first installation, do not site your device in its final position. Start with
just setting up your device by installing the sim card, connecting GPS & GSM
antennas and leaving it in a location with uninterrupted view of the sky. Once
your 103-RS is switched on and ready to use, test the functions you would like
to use and finally install it to its final position.
6.1.3
Do not install this device in places where it is likely to be exposed to
excessive heat, water or dust.
6.1.4
Find the 10 PIN harness and insert it into the corresponding holes.
Connect the wires with the original car circuit showing below:
The white cable with black line is for the ultrasonic fuel sensor and can be
discarded. User manual and installation guide for the ultrasonic fuel sensor are
supplied separately upon purchase.
