![background image](http://html1.mh-extra.com/html/revox/re-connect-m-219/re-connect-m-219_user-manual_1448970014.webp)
M219 Additional room amplifier
M Series
13
[4] M219-Link
M217- Display connection
The external display
M217
can
be connected to the
M219-Link
connector, which can give the
listener basic information about
the current music programme.
Connection is made using a
straight through
(not crossed),
4-core telephone cable with an
RJ11 plug (6P4C-Modular)
connected to the
M219 LINK
socket.
Front view of RJ11 Connector
* Comment
A 3-core cable with screening
is recommended. In this case,
no further cable would be
necessary if you added an
additional display at a later
stage.
[5]
IR-LINK
Connection for IR receiver or
wall-mounted remote control
If it is not possible or not
required that the
M219
is
controlled directly with a remote
control, a wall-mounted remote
controller (e.g.
M218
) or and
external IR eye (
MR-204
) can
be connected to the
IR-LINK
connector.
Connection to the IR receiver or
the wall-mounted remote
controller is made using a
screwable Phoenix plug
connector.
RE
V
OX
recommends the use of a
3-core, screened cable*
(microphone cable), where the
screening is used as an earth.
This cable may not be longer
than 40 meters. Please refer to
the label for the correct cabling:
+
Positive feed -
VCC
IN
IR Signal -
Data
-
Earth -
GND
the maximum number of IR
receivers per
M219
is
5
.
IR commands
The
M219
accepts all RC5 or
RC6 commands and carries out
those that are intended for it. All
others are transferred on to the
Multiroom central unit.
VCC
GND A B