Symphony
Configuration
30
Placement
Placing the Symphony on a table or
similar large surface leads to an
unnatural exaggeration in the fundamental
tone range. The crucial factor that leads
to this phenomenon is the surface in
front of the Symphony, that is to say the
distance
X
between the front operating
panel and the edge of the table. If the
distance
X
is greater than 30 cm/ 12 in.,
we recommend using the [Table] setting,
which carries out a corresponding
correction using the digital signal
processor (DSP).
If the distance is under 30 cm/ 12 in., the
setting [Free] is the better choice as a
rule.
[Free] is the factory setting.
Limiter
If the limiter is activated, the output
signal is limited in order to keep
distortions as low as possible. The
maximum volume level that can be
achieved is therefore somewhat lower
with an active limiter than without.
The Limiter is active when the unit is
delivered.
Содержание Joy Symphony
Страница 1: ...Introduction Symphony 1 E 1 0 E 1 3 ...
Страница 2: ......
Страница 16: ...Symphony Presentation 14 S208 Overview ...
Страница 90: ...Symphony Appendix 88 User manual Revox Joy Symphony ...