Revox Joy Symphony, Руководство пользователя

Страница: 14 / 90

Symphony Presentation
12
Connection panel info
1
USB storage*
Use the USB connection only for USB
storage up to 32 GB, as large amount of
data can lead to long read-in terms.
Sometimes a capturing of content is even
impossible.
A network hard drive (NAS) with UPnP
service is recommended for a large music
collection
.
*
with FAT16/32 formatting
2
Unplug the Symphony from the mains –
keep pressing the Factory button –
plug in the Symphony
power cord to the
mains. Release the Factory button after 5
secondes.
3
not supplied with the Symphony
Power supply info
The Symphony can be powered through
mains power (100 - 240 VAC ~ / 50 - 60
Hz) or through a DC source (12 - 18 VDC,
3A). Only one power source should be
selected at any one time, even though an
internal control prevents any damage
being caused by parallel power
operation.
USB information
Revox recommends that you only use the
USB connection for data carriers up to
32 GB as with large data quantities, the
reading time increases greatly or it can
be impossible to record data. With a
large music collection, we recommend
using a network hard disc (NAS) with an
UPnP service e.g. the Revox S37 audio
server with integrated rip function.
DAB+/ FM combiner information
As an option, the Joy Symphony can be
ordered with a DAB+/FM module or it
can have one fitted retrospectively.
If only one of the two reception methods
is required, the antenna signal can be
fed directly into the F socket on the rear
of the device as shown by the dotted line
in the graphic below.
A DAB+/FM switch is needed for the
parallel reception of DAB and FM signals
through the tuner module's F socket. In
this way, the two inputs, FM (87.5 - 108
MHz) and DAB+ (174 - 230 MHz), are
combined onto a joint HF output, as
shown by the solid line in the graphic
below. Revox offers an optimised
FM/DAB switch under the order number
1.561.097.01.