Revolutionary Science RS-SC-200, Инструкция по эксплуатации

Страница: 9 / 18

Recommended Load Configuration
Load including the trays must not exceed 4.5 lbs.
Cycle Phases
Fill Display reads “Fill” if the 'START' button is pressed and the chamber has
not yet been filled with sufficient water.
Preheat Mode. Display will read 'Ph' for Preheat. This mode will usually last for
about 30 minutes, depending on the load size.
Sterilization Mode Display will show temperature in Celsius:
•
Press ADVANCE to view the pressure reading in PSIg.
•
Press SET to view the cycle time remaining.
Dry Mode When the sterilization cycle is successfully completed, the display
will read 'dry,' for drain mode. As the water drains, the chamber
completely depressurizes and shortly thereafter (if selected), the
Dry Mode begins. Display will alternate between “dry” and the 30
minute timer. When the display reads “turn door,” the door must
be opened by rotating the door counter clockwise to the “open/dry”
position until the Dry Mode is complete.
CC Mode After a successful completion of the entire cycle, the display will
read 'CC' for Cycle Complete. Remove the door and remove the
instruments. Instruments may be warm to the touch.
Print Date/time, preset and achieved parameters are printed only if the
printer is on and properly connected to the printer port.
8