Revolution RV16, Руководство по установке и эксплуатации, Страница: 5 / 60

MAN-000037-00 REV C 3

Chemical Hazard. Working with lead-acid batteries may result in exposure to highly
corrosive acid. To protect eyes and skin, use the required P ersonal P rotective
E
quipment (
PPE
) as mandated by your employer and local regulations. At a minimum,
wear safety goggles and skin protection while connecting the battery charger or
working in the vicinity of lead-acid batteries.

Follow the battery manufacturer's published instructions when installing,
charging, and servicing batteries.

Use only with rechargeable batteries . Do not attempt to charge other battery types;
doing so may cause equipment damage and result in serious personal injury.

Do not expose the charger to rain or snow . The charger is NOT designed for
outdoor use.

Adequate Cooling Required . To prevent damage from overheating, proper airflow
must be ensured. Do not restrict fan inlets or exhaust outlets. Do not mount the charger
in a confined space or where the exhaust air will recirculate.

No User Serviceable Parts . If service is required, contact Power Designers Sibex or
its service representative.

These instructions assume a certain level of competence by the installer and/or
user . The following practices and codes contain relevant information, and should be
consulted for safe installation, testing, handling, and maintenance of rechargeable
lead-acid batteries. All applicable state and local codes must be followed.
•
N ational E lectrical S afety C ode ( NESC ), ANSI/IEEE C2-2007 (or latest revision).
Copies may be obtained by contacting: The I nstitute of E lectrical and E lectronics
E ngineers, Inc. ( IEEE ), Publications Office, 10662 Los Vaqueros Circle, P.O. Box
3014, Los Alamitos, CA 90720
www.ieee.org
•
N ational E lectrical C ode ( NEC ) NFPA-70 (or latest version) available from: National
Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02269
www.nfpa.org
CAUTION
WARNING