1795 N. Lapeer Rd., Oxford, MI 48371 T
– 763 424 3702 E – [email protected] rvlti.com
Copyright 2016 Revolution Lighting. All rights reserved.
IN072_01_20160928
Page 4 of 6
4.
It is important to position the bracket so that Pipe Clamp Bracket is approximately 5/8” to the end of the pipe. Doing this will avoid
collision of the cord grip on the fixture and the end of the pipe. See Figure 3.
5.
Level the Bracket prior to tightening the U-Bolts securely as shown in Figure 4. Use the Washers and nuts supplied with the U-
Bolts on the backside.
