1795 N. Lapeer Rd., Oxford, MI 48371 T
– 763 424 3702 E – [email protected] rvlti.com
Copyright 2016 Revolution Lighting. All rights reserved.
IN072_01_20160928
Page 1 of 6
Installation Instructions: Ecovista
™
G
2
LED Lighting System
WARNINGS:
Make sure that all power is turned off while installing fixture.
Do not turn power on until fixture is completely installed.
Turn power off at circuit breaker box.
Do not handle an energized fixture or energize any fixture when hands are wet or when standing on a
wet or damp surface, or in water.
This LED fixture is a highly advanced, energy efficient product that will provide the end user with years of dependable service. It will do so
only if installed properly in accordance with the national electric code and/or local code specifications. Failure to adhere to these codes and
restrictions may result in serious injury, damage to adjacent equipment, fixture and or power supply and will void the warranty.
The installation instructions do not support all details or variations in equipment, nor do they provide for all possible contingencies related to
the installation, service or mounting situation. Should specific problems occur that are not covered by the attached installation instructions,
please contact your sales representative or distributor for assistance.
Retain these installation instructions for future use. Do not modify this lighting device for any reason. These devices have been designed for
maximum performance and ease of installation, any modifications will void the warranty.
