13
1.
Bottom door latch — open the bottom to change the DIP switch settings. Or
replace the bottom cover for permanent installations using this latch.
2.
Audio wire — connect the microphone to the DSP or other audio equipment
using this wire.
3.
Button – Local mute control, or pulling the external control line to ground
when pressed.
To use the Elite Omni-Directional Tabletop Microphone, it should be centered
on the table within 2 to 6 feet (0.6 to 2m) from people speaking and do not need
to be pointing any particular direction as they pick up sound from all
directions.
It is always better to place a microphone as close to meeting participants as
possible, while avoiding placing the microphone where it might be blocked by
equipment or paperwork. Do not place microphones too close to an audio or
video conference speaker to avoid echoes. Make sure that the microphone’s
rubber feet are sitting atop a flat surface.
2
1
3
