Revo Uno 2, Руководство по эксплуатации, Страница: 10 / 42

Trouble-Shooting
DAB Digital Radio
Q. I hear a ‘burbling’ noise on some
stations.
A. If the signal strength is too low, a break-
up in reception can occur. This sound is
the result. Make sure that Uno’s antenna
is fully extended and in an upright
position. If the problem persists, move
Uno to another location or check that
you are in an area where reception of
this station is possible.
Q. I get a ‘No stations available’ message?
A. Make sure that your antenna is fully
extended and vertical. Check the signal
strength and move Uno to another
location if necessary.
Q. Uno’s clock isn’t set.
A. Uno needs to be able to pick-up a DAB
signal or have its clock set manually.
If Uno can find a DAB station, it can then
set its clock.
Factory Reset
In the unlikely event that Uno performs erratically, it is possible to perform a software
reset to restore the original factory settings. The factory reset option can be found under
the System Setup heading, which itself can be found under the Main Menu.
Technical Specification
General: Mono DAB and FM radio with full Band III reception.
Speaker: 2” full-range neodymium, 8W power handling
Audio Power Output: 2W
Frequency Ranges: DAB Band III (174 - 240 MHz)
DAB+ coverage
FM (87.5 - 108 MHz)
Antenna: Integral telescopic aerial
Input Connectors: DC power adaptor socket (230V adapter supplied)
3.5mm line-in for auxiliary devices (M-Port)
Output Connector: 3.5mm headphone socket
LCD Display: Double height, high resolution negative display with
digital clock, status icons and two information lines
Alarm Clock:
Alarm clock with snooze and sleep functions
Presets:
10 x DAB and 10 x FM presets
Remote Control:
Infra-red remote control
Mains Power Supply:
12V 1.2mA
Approvals:
CE marked and RoHS compliant.
Dimensions: 167mm (H) x 105mm (W) x 105mm (D)
English
10